Zipper Size & Length

Buying a zipper means picking a size (how heavy) and a length. Size comes from the use or the teeth width; length from the opening.

Length to buy

Zipper length (stop to stop)
22.86 cm / 9 in
Nearest stock length
25 cm / 9 in

Closed-end zippers can be shortened from the top.

Which size is it?

Likely size
#5

The size number is roughly the width in mm; makers and chain types differ by about 1 mm.

Size-to-width figures are approximate; check the maker's specification.

Parts of a zipper
tape slider bottom stop top stop Zipper length: stop to stop teeth width ≈ size (mm)

How to work out the length

  1. Zipper length is measured from the top stop to the bottom stop, not including the tape ends. Closed-end and separating zippers match the opening.
  2. Invisible zippers are bought about 1 in (2.5 cm) longer than the opening so the slider can park below it.
  3. If there is no exact length, buy longer: closed-end zippers can be shortened from the top.

Reading zipper sizes

  • The size number is roughly the closed chain width in mm; larger is heavier. Makers and chain types (coil, metal, molded) differ by about 1 mm, so a measurement only gives the likely size.
  • Slider and chain must match in size and type: a #5 metal slider does not fit #5 coil.
  • Separating (jacket) zippers cannot be shortened from the bottom; buy the exact length.

Zipper sizes and uses

SizeWidth closed (approx.)Typical use
#33–4 mmskirts, dresses, cushions, pouches
#4.54.5–5 mmtrousers, light jackets
#55–6 mmjeans, jackets, bags
#7 / #87–8 mmcoats, parkas, large bags
#109–10 mmtents, luggage, heavy gear

Frequently Asked Questions

Related